Custom Motored Bicycles

WORKSMAN INDUSTRIAL NEWS BOY BLACK FRAMES  $275.00 local pick up,$38.00 for lower 48 state shipping,INDUSTRIAL NEWS BOY FRAME,brazed and welded in the USA,made in the USA!  45 inch wheelbase frame,with sloped down top tube,original vintage styling,since 1898.Each frame will include a traced white cardboard template of tank shown,so you can use it to make an in-frame tank if you wish.Midwest Worksman distributer call to get heavy duty parts!

Worksman Heavy Duty Industrial Bicycle Motorized with 66/80cc Grubee Skyhawk Motor with speed carb.Super heavy duty wheels with drum brake front brake,front bullet headlight,and rear fender light.$1400.00 Updated this bike with inframe tank and different rear fender,testing the tank over winter in the garage and running,to see if it holds gas,first test ride 12/12/2011 holds gas.Rear wheel has aluminum hub sprocket adapter with 38 teeth,testing this gear ratio.

  I did not weld to modify the frame,but the chainguard and the tabs that hold it need to be ground off to mount the motor low in the frame. The head of the motor needs to be removed and turned around so the spark plug faces in the other direction, toward the front of the motor.The pedal sprocket needs to be changed to a 36 Tooth Sprocket.

    The rear sprocket mount up for the  motor drive chain the teeth on the sprocket need to be dished toward the spokes not away from the spokes,or a flat sprocket needs to be used. Shimano brake arm needs to be bent and modified, to clear heads of bolts.Please call with any questions,Lynn at 414-732-0017  

Steel in FrameGas Tank Template,$10.00 template used to make this tank,traced in white cardboard .To make the tank I used 22 Guage sheet metal,tinsnips,angle grinder,thicker or different metals can be welded or brazed to make a tank.Worksman Traced Template also available.Call for details and questions. Thanks Lynn 414-732-0017

BRASS FILLER CAP SPIGOT BUNG,inner diameter 15mm,9/16 inch.Drill hole in cap for venting,neck can be cut down shorter.Solid brass,heat with MAP gas before brazing or soildering.$18.00

DYNO KUSTOM KRUISER IN FRAME TANK TEMPLATE,this template is for the DYNO frame without the gusset in the frame.Measuring and cutting the sheet metal is the hardest part of making a tank,let this template take the guess work out if it. $10.00 Working on a template for the tank for the gusseted frame.